mirror of
https://github.com/cnlohr/lolra.git
synced 2026-06-15 07:19:25 +00:00
cnlohr
334 lines
8.9 KiB
C
334 lines
8.9 KiB
C
// XXX TODO: Play with high bits of ADC control to see if there's a gain cicuit.
|
|
// XXX TODO: Try to see if there is a way to tightly control Q, right now it's kinda random.
|
|
// XXX TODO: It looks like our loop can exit early - or more specifically we can "wrap around" our data because adc may not be == because it is skipping numbers
|
|
// XXX TODO: Verify it's actually using the HSE.
|
|
|
|
/**
|
|
|
|
MIT-like-non-ai-license
|
|
|
|
Copyright (c) 2024 Charles Lohr "CNLohr"
|
|
|
|
Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
of this software and associated documentation files (the "Software"), to deal
|
|
in the Software without restriction, including without limitation the rights
|
|
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
copies of the Software, and to permit persons to whom the Software is
|
|
furnished to do so, subject to the two following conditions:
|
|
|
|
The above copyright notice and this permission notice shall be included in all
|
|
copies or substantial portions of the Software.
|
|
|
|
In addition the following restrictions apply:
|
|
|
|
1. The Software and any modifications made to it may not be used for the
|
|
purpose of training or improving machine learning algorithms, including but not
|
|
limited to artificial intelligence, natural language processing, or data
|
|
mining. This condition applies to any derivatives, modifications, or updates
|
|
based on the Software code. Any usage of the Software in an AI-training dataset
|
|
is considered a breach of this License.
|
|
|
|
2. The Software may not be included in any dataset used for training or
|
|
improving machine learning algorithms, including but not limited to artificial
|
|
intelligence, natural language processing, or data mining.
|
|
|
|
|
|
3. Any person or organization found to be in violation of these restrictions
|
|
will be subject to legal action and may be held liable for any damages
|
|
resulting from such use.
|
|
|
|
If any term is unenforcable, other terms remain in-force.
|
|
|
|
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
|
SOFTWARE.
|
|
|
|
**/
|
|
|
|
// NOT LORA!!! -- but experimenting with the possibility of rx.
|
|
|
|
// SETUP INSTRUCTIONS:
|
|
// (1) `make` in the optionbytes folder to configure `RESET` correctly.
|
|
// (2) Create a tone (if using the funprog, ../ch32v003fun/minichlink/minichlink -X ECLK 1:235:189:9:3 for 27.48387097MHz
|
|
// (2) or, for 24.387096762MHz - ../ch32v003fun/minichlink/minichlink -X ECLK 1:150:49:8:3
|
|
|
|
|
|
|
|
|
|
#include "ch32v003fun.h"
|
|
#include <stdio.h>
|
|
|
|
/* General note:
|
|
Max speed was found to be:
|
|
ADCclk = RCC / 2
|
|
SAMPTR2 = 0 (3 cycles)
|
|
PWM period = 27 (48/28 = 1.714MHz)
|
|
|
|
If you go a little slower...
|
|
ADCclk = RCC / 2
|
|
SAMPTR2 = 1 (9 cycles)
|
|
PWM period = 39 (48/40 = 1.2MHz)
|
|
|
|
Perform Quadrature Decoding
|
|
I = + + - -
|
|
Q = + - - +
|
|
|
|
We want the target waveform to be exactly n * Fs - fs / 4 = FBrd
|
|
for a natural value of n.
|
|
27 / (n-1/4) = Fs
|
|
|
|
Oddly enough, after creating a table with various values of N and
|
|
possible divisors, a PERFECT divisor works out to the "max speed" listed above (1.714MHz)
|
|
but that makes me scared at this juncture. What if we intentionally just target 1.5MHz?
|
|
1.5 = freq / (n-1/4)
|
|
arbitrarily select n to be 17 (for the 17th harmonic)
|
|
|
|
TODO: Is it supposed to be n-1/4 or n+1/4 or does it not matter?
|
|
|
|
|
|
We will be targeting 48/35 MHz - (with PWM_PERIOD 34)
|
|
Calculated to use the 19.75th harmonic @ 27.08571429MHz, but ideal found at 27.08643MHz
|
|
*/
|
|
|
|
#define Q 80
|
|
|
|
#define PWM_PERIOD (31-1) //For 27.0857MHz
|
|
#define QUADRATURE
|
|
|
|
//#define PWM_PERIOD (32-1)
|
|
//#define QUADRATURE
|
|
#define PWM_OUTPUT 3
|
|
|
|
#define ADC_BUFFSIZE 256
|
|
volatile uint16_t adc_buffer[ADC_BUFFSIZE];
|
|
|
|
void SetupADC()
|
|
{
|
|
// PD4 is analog input chl 7
|
|
GPIOD->CFGLR &= ~(0xf<<(4*4)); // CNF = 00: Analog, MODE = 00: Input
|
|
|
|
// Reset the ADC to init all regs
|
|
RCC->APB2PRSTR |= RCC_APB2Periph_ADC1;
|
|
RCC->APB2PRSTR &= ~RCC_APB2Periph_ADC1;
|
|
|
|
// ADCCLK = 12 MHz => RCC_ADCPRE divide by 4
|
|
RCC->CFGR0 &= ~RCC_ADCPRE; // Clear out the bis in case they were set
|
|
RCC->CFGR0 |= RCC_ADCPRE_DIV2; // Fastest possible (divide-by-2) NOTE: This is OUTSIDE the specified value in the datasheet.
|
|
|
|
// Set up single conversion on chl 7
|
|
ADC1->RSQR1 = 0;
|
|
ADC1->RSQR2 = 0;
|
|
ADC1->RSQR3 = 7; // 0-9 for 8 ext inputs and two internals
|
|
|
|
// Not using injection group.
|
|
|
|
// Sampling time for channels. Careful: This has PID tuning implications.
|
|
// Note that with 3 and 3,the full loop (and injection) runs at 138kHz.
|
|
ADC1->SAMPTR2 = (0<<(3*7));
|
|
|
|
// Turn on ADC and set rule group to sw trig
|
|
// 0 = Use TRGO event for Timer 1 to fire ADC rule.
|
|
ADC1->CTLR2 = ADC_ADON | ADC_EXTTRIG | ADC_DMA;
|
|
|
|
// Reset calibration
|
|
ADC1->CTLR2 |= ADC_RSTCAL;
|
|
while(ADC1->CTLR2 & ADC_RSTCAL);
|
|
|
|
// Calibrate ADC
|
|
ADC1->CTLR2 |= ADC_CAL;
|
|
while(ADC1->CTLR2 & ADC_CAL);
|
|
|
|
// ADC_SCAN: Allow scanning.
|
|
ADC1->CTLR1 = ADC_SCAN;
|
|
|
|
// Turn on DMA
|
|
RCC->AHBPCENR |= RCC_AHBPeriph_DMA1;
|
|
|
|
//DMA1_Channel1 is for ADC
|
|
DMA1_Channel1->PADDR = (uint32_t)&ADC1->RDATAR;
|
|
DMA1_Channel1->MADDR = (uint32_t)adc_buffer;
|
|
DMA1_Channel1->CNTR = ADC_BUFFSIZE;
|
|
DMA1_Channel1->CFGR =
|
|
DMA_M2M_Disable |
|
|
DMA_Priority_VeryHigh |
|
|
DMA_MemoryDataSize_HalfWord |
|
|
DMA_PeripheralDataSize_HalfWord |
|
|
DMA_MemoryInc_Enable |
|
|
DMA_Mode_Circular |
|
|
DMA_DIR_PeripheralSRC;
|
|
|
|
// Turn on DMA channel 1
|
|
DMA1_Channel1->CFGR |= DMA_CFGR1_EN;
|
|
|
|
// Enable continuous conversion and DMA
|
|
//ADC1->CTLR2 |= ADC_DMA | ADC_EXTSEL; //ADC_CONT
|
|
|
|
// start conversion
|
|
ADC1->CTLR2 |= ADC_SWSTART;
|
|
|
|
}
|
|
|
|
static void SetupTimer1()
|
|
{
|
|
// Enable Timer 1
|
|
RCC->APB2PRSTR |= RCC_APB2Periph_TIM1;
|
|
RCC->APB2PRSTR &= ~RCC_APB2Periph_TIM1;
|
|
|
|
TIM1->PSC = 0x0000; // Prescalar to 0x0000 (so, 48MHz base clock)
|
|
TIM1->ATRLR = PWM_PERIOD;
|
|
|
|
#ifdef PWM_OUTPUT
|
|
GPIOC->CFGLR &= ~(0xf<<(4*4));
|
|
GPIOC->CFGLR |= (GPIO_Speed_10MHz | GPIO_CNF_OUT_PP_AF)<<(4*4);
|
|
|
|
TIM1->CCER = TIM_CC4E | TIM_CC4P;
|
|
TIM1->CHCTLR2 = TIM_OC4M_2 | TIM_OC4M_1;
|
|
TIM1->CH4CVR = 5; // Actual duty cycle (Off to begin with)
|
|
#endif
|
|
|
|
// Setup TRGO for ADC. This makes is to the ADC will trigger on timer
|
|
// reset, so we trigger at the same position every time relative to the
|
|
// FET turning on.
|
|
TIM1->CTLR2 = TIM_MMS_1;
|
|
|
|
// Enable TIM1 outputs
|
|
TIM1->BDTR = TIM_MOE;
|
|
TIM1->CTLR1 = TIM_CEN;
|
|
}
|
|
|
|
|
|
void InnerLoop() __attribute__((noreturn));
|
|
|
|
|
|
void InnerLoop()
|
|
{
|
|
int i = 0;
|
|
int q = 0;
|
|
int tpl = 0;
|
|
|
|
// Timer goes backwards when we are moving forwards.
|
|
volatile uint16_t * adc_buffer_end = 0;
|
|
volatile uint16_t * adc_buffer_top = adc_buffer + ADC_BUFFSIZE;
|
|
volatile uint16_t * adc = adc_buffer;
|
|
|
|
int frcnt = 0;
|
|
|
|
int tstart = 0;
|
|
|
|
while( 1 )
|
|
{
|
|
tpl = ADC_BUFFSIZE - DMA1_Channel1->CNTR; // Warning, sometimes this is == to the base, or == 0 (i.e. might be 256, if top is 255)
|
|
if( tpl == ADC_BUFFSIZE ) tpl = 0;
|
|
|
|
adc_buffer_end = adc_buffer + ( ( tpl / 4) * 4 );
|
|
|
|
while( adc != adc_buffer_end )
|
|
{
|
|
#ifdef QUADRATURE
|
|
int32_t t = adc[0];
|
|
i += t; q += t;
|
|
t = adc[1];
|
|
i -= t; q += t;
|
|
t = adc[2];
|
|
i -= t; q -= t;
|
|
t = adc[3];
|
|
i += t; q -= t;
|
|
adc += 4;
|
|
frcnt += 4;
|
|
#else
|
|
i = i + adc[0] - adc[1];
|
|
adc += 2;
|
|
frcnt += 2;
|
|
#endif
|
|
|
|
if( adc == adc_buffer_top ) adc = adc_buffer;
|
|
}
|
|
|
|
if( frcnt > Q )
|
|
{
|
|
#ifdef QUADRATURE
|
|
int ti = i>>1;
|
|
int tq = q>>1;
|
|
int s = (ti*ti + tq*tq)>>8;
|
|
#else
|
|
int s = i>>2;
|
|
#endif
|
|
|
|
#ifdef TIGHT_OUT
|
|
printf( "%d\n", i );
|
|
#elif defined( PWM_OUTPUT )
|
|
int tv = (s>>PWM_OUTPUT) + (PWM_PERIOD/2);
|
|
if( tv < 0 ) tv = 0;
|
|
if( tv >= PWM_PERIOD ) tv = PWM_PERIOD-1;
|
|
TIM1->CH4CVR = tv;
|
|
#else
|
|
int ti = i>>2;
|
|
int tq = q>>2;
|
|
int s = (ti*ti + tq*tq)>>8;
|
|
//s = usqrt4(s);
|
|
|
|
printf( "%8d I:%7d Q:%7d [%d %d %d %d] / %d\n",s, i ,q, adc_buffer[0], adc_buffer[1], adc_buffer[2], adc_buffer[3], SysTick->CNT - tstart );
|
|
#endif
|
|
//printf( "%d\n", s );
|
|
frcnt = 0;
|
|
i = 0;
|
|
q = 0;
|
|
tstart = SysTick->CNT;
|
|
}
|
|
/*
|
|
Delay_Us( 100 );
|
|
int end = DMA1_Channel1->CNTR;
|
|
int v0 = adc_buffer[0];
|
|
int v1 = adc_buffer[1];
|
|
int v2 = adc_buffer[2];
|
|
int v3 = adc_buffer[3];
|
|
printf( "%d %d %d %d %d\n", (uint8_t)(start-end), v0, v1, v2, v3 );
|
|
*/
|
|
}
|
|
|
|
}
|
|
|
|
int main()
|
|
{
|
|
// REQUIRES External 24MHz oscillator
|
|
printf( "Initializing\n" );
|
|
|
|
SystemInit();
|
|
|
|
printf( "System On\n" );
|
|
|
|
// Enable Peripherals
|
|
RCC->APB2PCENR |= RCC_APB2Periph_GPIOD | RCC_APB2Periph_GPIOC |
|
|
RCC_APB2Periph_GPIOA | RCC_APB2Periph_TIM1 | RCC_APB2Periph_ADC1 |
|
|
RCC_APB2Periph_AFIO;
|
|
|
|
RCC->APB1PCENR = RCC_APB1Periph_TIM2;
|
|
|
|
SetupADC();
|
|
|
|
|
|
#if 0
|
|
// turn on the op-amp
|
|
EXTEN->EXTEN_CTR |= EXTEN_OPA_EN;
|
|
|
|
// select op-amp pos pin: 0 = PA2, 1 = PD7
|
|
EXTEN->EXTEN_CTR |= EXTEN_OPA_PSEL;
|
|
|
|
// select op-amp neg pin: 0 = PA1, 1 = PD0
|
|
EXTEN->EXTEN_CTR |= EXTEN_OPA_NSEL;
|
|
#endif
|
|
|
|
|
|
printf( "ADC Setup\n" );
|
|
|
|
SetupTimer1();
|
|
|
|
printf( "Timer 1 setup\n" );
|
|
|
|
InnerLoop();
|
|
}
|