commit 6eab425ace6bfe1edcb1374cc88d7c014e7150d7
Author: danio <ddudis1@wp.pl>
Date:   Wed Jun 14 22:12:45 2023 +0200

    fix broken repo

diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..1f89d9f
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1 @@
+.config
diff --git a/LICENSE b/LICENSE
new file mode 100644
index 0000000..dd3ba37
--- /dev/null
+++ b/LICENSE
@@ -0,0 +1,19 @@
+Minimal Linux Booter
+
+Copyright (C) 2023 Tomas M <slax.org, linux-live.org>.
+Copyright (C) 2023 Danuel K. <danielisko.net, git.danielisko.net>.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+MA 02110-1301 USA.
\ No newline at end of file
diff --git a/README.txt b/README.txt
new file mode 100644
index 0000000..07896af
--- /dev/null
+++ b/README.txt
@@ -0,0 +1,57 @@
+Minimal Linux Booter
+====================
+
+This project is to minimize Linux-Live Kit (https://github.com/Tomas-M/linux-live)
+
+Note:
+	* Your distro must have installed:
+		- squashfs-tools,
+		- xorriso,
+		- cpio,
+		- file,
+		- gzip,
+		- sed,
+		- tar,
+		- grep,
+		- rsync,
+		- syslinux-utils,
+		- bash,
+		- (Optional) mdadm.
+		- (Optional for light "system.sfs", (if most on left then best compression)) zstd, xz, lzma, bzip2 and gzip.
+	* Your linux kernel must have overlayfs and squashfs module.
+		- If zstd compressor is not found, mksquashfs try: xz, lzma, bzip2 and gzip - in this order.
+	* Installer is included in this project.
+		- In your booted linux distro, open terminal and type as root `install-linux`.
+		- In order to install your distro to hdd you also must have installed:
+			- dialog,
+			- fdisk,
+			- cfdisk,
+			- mke2fs,
+			- grub2.
+	* You can also boot your linux distro in frugal mode (for Windows and Linux):
+		- For Linux (All hdd free space in frugal mode):
+			- Boot your linux distro,
+			- Format partition (for ex. /dev/sda1) as linux filesystem (for ex. ext4),
+			- Create directory (for ex. /mnt/sda1),
+			- Mount /dev/sda1 to /mnt/sda1,
+			- Create loop directory to unpack files from iso image (for ex. /mnt/iso),
+			- Mount YOUR_BUILT_LINUX_DISTRO_WITH_THIS_TOOL.iso /mnt/iso,
+			- Copy files from /mnt/iso to /mnt/sda1,
+			- cd to /mnt/sda1,
+			- Add executable permission by: `chmod +x bootinst.sh`,
+			- Run: `./bootinst.sh`,
+			- Cleanup: `umount -f /mnt/sda1 /mnt/iso && rmdir /mnt/sda1 /mnt/iso`,
+			- Now `reboot` to your frugal mode linux distro.
+		- For Windows (Only 4 GB free space in frugal mode due to fat32 limits):
+			- Format partition (for ex. d:\) to fat32 (is more stable that ntfs),
+			- Copy files from iso image to formated d:\,
+			- Open cmd as admin,
+			- cd to d:\,
+			- Run in cmd `bootinst.bat`,
+			- Now you can reboot your device to your linux distro,
+		- OR Use rufus to write image to pendrive.
+	* The iso image uses legacy MBR and UEFI bootloader.
+		- The `install-linux` uses legacy MBR bootloader at this time!
+	* You should be chrooted to linux distro.
+	* You should not be run that tool on *YOUR* **REAL** running linux.
+	* The final iso image will be in your root device (means /) (If you ran this tool in *YOUR* **REAL** running linux) or in your chrooted linux distro (means /path/to/chroot/folder).
diff --git a/bootfiles/boot/grub/grub.cfg b/bootfiles/boot/grub/grub.cfg
new file mode 100644
index 0000000..09e8cec
--- /dev/null
+++ b/bootfiles/boot/grub/grub.cfg
@@ -0,0 +1,16 @@
+menuentry "Run __DISTRO__ with persistence" {
+	linux /vmlinuz perch
+	initrd /initrd.img
+}
+menuentry "Run __DISTRO__ from RAM without persistence" {
+	linux /vmlinuz toram
+	initrd /initrd.img
+}
+menuentry "Run __DISTRO__ with debug" {
+	linux /vmlinuz debug
+	initrd /initrd.img
+}
+menuentry "Run __DISTRO__ with debug and first stage shell" {
+	linux /vmlinuz debug shell
+	initrd /initrd.img
+}
diff --git a/bootfiles/bootinst.bat b/bootfiles/bootinst.bat
new file mode 100644
index 0000000..4631139
--- /dev/null
+++ b/bootfiles/bootinst.bat
@@ -0,0 +1,47 @@
+@echo off
+cls
+echo ===============================================================================
+echo                           Setting your drive to boot
+echo ===============================================================================
+echo.
+
+set DISK=none
+set BOOTFLAG=boot666s.tmp
+
+echo This file is used to determine current drive letter. It should be deleted. >\%BOOTFLAG%
+if not exist \%BOOTFLAG% goto readOnly
+
+echo wait please ...
+for %%d in ( C D E F G H I J K L M N O P Q R S T U V W X Y Z ) do if exist %%d:\%BOOTFLAG% set DISK=%%d
+del \%BOOTFLAG%
+if %DISK% == none goto DiskNotFound
+
+echo.
+echo Setting up boot record for %DISK%:, wait please...
+
+if %OS% == Windows_NT goto setupNT
+goto setup95
+
+:setupNT
+\syslinux.exe -maf %DISK%:
+goto setupDone
+
+:setup95
+\syslinux.com -maf %DISK%:
+
+:setupDone
+echo Installation finished.
+goto pauseit
+
+:readOnly
+echo You're starting boot installer from a read-only media, this will not work.
+goto pauseit
+
+:DiskNotFound
+echo Error: can't find out current drive letter
+
+:pauseit
+echo Press any key to exit...
+pause > nul
+
+:end
diff --git a/bootfiles/bootinst.sh b/bootfiles/bootinst.sh
new file mode 100644
index 0000000..67411ed
--- /dev/null
+++ b/bootfiles/bootinst.sh
@@ -0,0 +1,40 @@
+#!/bin/sh
+# Setup booting from disk (USB or harddrive)
+# Requires: fdisk, df, tail, tr, cut, dd, sed
+
+# change working directory to dir from which we are started
+CWD="$(pwd)"
+BOOT="$(dirname "$0")"
+cd "$BOOT"
+
+# find out device and mountpoint
+PART="$(df . | tail -n 1 | tr -s " " | cut -d " " -f 1)"
+DEV="$(echo "$PART" | sed -r "s:[0-9]+\$::" | sed -r "s:([0-9])[a-z]+\$:\\1:i")"
+
+./extlinux.exe --install "$BOOT"
+
+if [ $? -ne 0 ]; then
+   echo "Error installing boot loader."
+   echo "Read the errors above and press enter to exit..."
+   read junk
+   exit 1
+fi
+
+
+if [ "$DEV" != "$PART" ]; then
+   # Setup MBR on the first block
+   dd bs=440 count=1 conv=notrunc if="$BOOT/mbr.bin" of="$DEV" 2>/dev/null
+
+   # Toggle a bootable flag
+   PART="$(echo "$PART" | sed -r "s:.*[^0-9]::")"
+   (
+      fdisk -l "$DEV" | fgrep "*" | fgrep "$DEV" | cut -d " " -f 1 \
+        | sed -r "s:.*[^0-9]::" | xargs -I '{}' echo -ne "a\n{}\n"
+      echo a
+      echo $PART
+      echo w
+   ) | fdisk $DEV >/dev/null 2>&1
+fi
+
+echo "Boot installation finished."
+cd "$CWD"
diff --git a/bootfiles/extlinux.exe b/bootfiles/extlinux.exe
new file mode 100644
index 0000000..8428a13
Binary files /dev/null and b/bootfiles/extlinux.exe differ
diff --git a/bootfiles/isolinux.bin b/bootfiles/isolinux.bin
new file mode 100644
index 0000000..a7100c9
Binary files /dev/null and b/bootfiles/isolinux.bin differ
diff --git a/bootfiles/logo.png b/bootfiles/logo.png
new file mode 100644
index 0000000..a7bc153
Binary files /dev/null and b/bootfiles/logo.png differ
diff --git a/bootfiles/mbr.bin b/bootfiles/mbr.bin
new file mode 100644
index 0000000..0d8bad4
Binary files /dev/null and b/bootfiles/mbr.bin differ
diff --git a/bootfiles/syslinux.cfg b/bootfiles/syslinux.cfg
new file mode 100644
index 0000000..d0cef8a
--- /dev/null
+++ b/bootfiles/syslinux.cfg
@@ -0,0 +1,25 @@
+UI vesamenu.c32
+MENU BACKGROUND logo.png
+
+TIMEOUT 140
+MENU CLEAR
+
+LABEL default
+MENU LABEL Run __DISTRO__ with persistence
+KERNEL /vmlinuz
+APPEND initrd=/initrd.img perch
+
+LABEL toram
+MENU LABEL Run __DISTRO__ from RAM without persistence
+KERNEL /vmlinuz
+APPEND initrd=/initrd.img toram
+
+LABEL debug
+MENU LABEL Run __DISTRO__ with debug
+KERNEL /vmlinuz
+APPEND initrd=/initrd.img debug
+
+LABEL debugshell
+MENU LABEL Run __DISTRO__ with debug and first stage shell
+KERNEL /vmlinuz
+APPEND initrd=/initrd.img debug shell
diff --git a/bootfiles/syslinux.com b/bootfiles/syslinux.com
new file mode 100644
index 0000000..34c92e6
Binary files /dev/null and b/bootfiles/syslinux.com differ
diff --git a/bootfiles/syslinux.exe b/bootfiles/syslinux.exe
new file mode 100644
index 0000000..06d7ae5
Binary files /dev/null and b/bootfiles/syslinux.exe differ
diff --git a/bootfiles/vesamenu.c32 b/bootfiles/vesamenu.c32
new file mode 100644
index 0000000..664e392
Binary files /dev/null and b/bootfiles/vesamenu.c32 differ
diff --git a/build b/build
new file mode 100644
index 0000000..f5797f7
--- /dev/null
+++ b/build
@@ -0,0 +1,83 @@
+#!/usr/bin/env bash
+
+for i in mksquashfs cpio gzip sed grep xorriso tar file; do
+	if [ ! -x "$(command -v ${i})" ]; then
+		case ${i} in
+			mksquashfs) a="squashfs-tools";;
+			readelf) a="binutils";;
+			*) a="${i}"
+		esac
+		echo "Please install ${a} package to run this tool"
+		exit 1
+	fi
+done
+
+exec > >(tee -i /tmp/mlb.log) 2>&1
+cd "$(dirname $(readlink -f ${0}))" || exit 1
+cp -f config .config
+
+mapfile -t list < <(ls -A /boot | egrep "^bzImage*|*kernel*|^vmlinuz*" 2>/dev/null | grep -v "init")
+if [ ${#list[@]} -gt 1 ]; then
+	n=0
+	echo -e "Please choose your kernel to proceed:\nChoose number from ${n} to ${#list[@]}\n-----\n"
+	for a in "${list[@]}"; do
+		echo "[${n}] - ${a}"
+		((n++))
+	done
+	echo "-----"
+	read kernel
+	kernel="/boot/${list[${kernel}]}"
+	unset list n
+else
+	kernel="/boot/${list[0]}"
+fi
+set -x
+time (
+	echo "KERNEL=\"${kernel}\"" >>.config
+	echo "LMK=\"/lib/modules/$(file -bL ${kernel} | grep -o 'version .*' | cut -d' ' -f2)\"" >>.config
+	unset kernel
+	top="$(pwd)"
+	. .config
+	workTmpDir="$(mktemp -d /tmp/Mlb_WorkDir_XXXXXXX)"
+	DATA="${workTmpDir}/isoImage"
+	INITRD="$(initrd/create)"
+	ret="${?}"
+	tmpRoot="${workTmpDir}/tmpRoot"
+	trap "rm -rf ${workTmpDir} /tmp/MlbInitRd{,.img}&&exit 1" 2 6 15
+	mkdir -p ${DATA}/changes ${DATA}/${DISTRO}/modules
+	rsync --force -aAP $(for i in $(awk '{print $2}' /proc/mounts) /tmp; do echo "--exclude=${i}/*"; done) / ${tmpRoot}
+	chmod +x -R inc2sys
+	cp -rf inc2sys/* ${tmpRoot}
+	mknod ${tmpRoot}/dev/console c 5 1
+	mknod ${tmpRoot}/dev/null c 1 3
+	mknod ${tmpRoot}/dev/ram0 b 1 0
+	mknod ${tmpRoot}/dev/tty1 c 4 1
+	mknod ${tmpRoot}/dev/tty2 c 4 2
+	mknod ${tmpRoot}/dev/tty3 c 4 3
+	mknod ${tmpRoot}/dev/tty4 c 4 4
+	for i in zstd xz lzma bzip2 gzip; do
+		mksquashfs ${tmpRoot} ${DATA}/${DISTRO}/system.sfs -comp ${i} -noappend
+		[ -e ${DATA}/${DISTRO}/system.sfs ]&&break
+	done
+	mv -f ${INITRD} ${DATA}/initrd.img
+	cp -rf bootfiles/* ${DATA}
+	mv -f ${tmpRoot}/tmp/grub_efi.img ${DATA}/efi.img
+	for i in ${DATA}/syslinux.cfg ${DATA}/boot/grub/grub.cfg; do
+		sed -i -r "s/__DISTRO__/${DISTRO}/" ${i}
+	done
+	cp -f ${KERNEL} ${DATA}/vmlinuz
+	cd ${DATA}
+	utc="$(date +%s)"
+	v="$(git rev-parse HEAD 2>/dev/null)"&&v="${v}:GIT"||v="INFINITY:LOCAL"
+	cat <<eot >.MlbMeta
+# Built using Minimal-Linux-Booter.
+MLB_VERSION="${v}"
+MLB_NAME="${DISTRO}"
+MLB_UTC="${utc}"
+eot
+	[[ ${ret} = 2 ]]&&echo "MLB_ELF_STATIC_INITRD=\"1\"" >>.MlbMeta||echo "MLB_ELF_STATIC_INITRD=\"0\"" >>.MlbMeta
+	xorriso -as mkisofs -o /${DISTRO}-${utc}.iso -J -R -D -A ${DISTRO} -V ${DISTRO} -no-emul-boot -boot-info-table -boot-load-size 4 -b isolinux.bin -c isolinux.boot -eltorito-alt-boot -e /efi.img -no-emul-boot .
+	isohybrid --version >/dev/null 2>&1&&isohybrid -u /${DISTRO}-${utc}.iso
+	cd ${top}
+	rm -rf ${workTmpDir}
+)
diff --git a/config b/config
new file mode 100644
index 0000000..2ed4b5d
--- /dev/null
+++ b/config
@@ -0,0 +1 @@
+DISTRO="linux"
diff --git a/inc2sys/tmp/grub_efi.img b/inc2sys/tmp/grub_efi.img
new file mode 100644
index 0000000..d81e5a2
Binary files /dev/null and b/inc2sys/tmp/grub_efi.img differ
diff --git a/inc2sys/usr/bin/install-linux b/inc2sys/usr/bin/install-linux
new file mode 100644
index 0000000..82bb8ea
--- /dev/null
+++ b/inc2sys/usr/bin/install-linux
@@ -0,0 +1,279 @@
+#!/usr/bin/env bash
+
+# installation-help for Slax
+# 22.05.2007
+# shell script for installation of SLAX to harddisk
+# written by Thomas Schoenhuetl <pilleus.pulcher@arcor.de> 22.05.2007
+# It contains parts of the official Slackware installer.
+# This shell script is contributed under the terms of GPL v2 by Thomas Schoenhuetl <pilleus.pulcher@arcor.de> 22.05.2007.
+
+# Modified script "slax2hd" for installing Generic Linux to hdd
+#   BY: Daniel K. aka *DANiO*
+
+for i in dialog fdisk cfdisk sed grep mke2fs grub-install; do
+	if [ ! -x $(command -v ${i}) ]; then
+		req_app+="${i} "
+		fail="true"
+	fi
+done
+[ ${fail} ] && echo "Please install \"${req_app}\" to run this installer" && exit 1
+
+dialog --clear --title "GENERAL INFORMATION" --msgbox "Generic installer is a gui-based tool to install your running Linux to your harddisk.\n\n You are able to partition and format your harddisk and install in the end a bootloader.\n\n You will use this installer at your own risk. I am not responsible for lost of datas or something else.\n\n If you accept this, you can start now! Or you may cancel the installer!" 20 70
+if [ $? = 1 ] ; then
+exit
+fi
+
+# run cfdisk to partition the harddrive
+dialog --clear --title "PARTITION THE HARDDISK" --msgbox "Generic installer will now start 'cfdisk' so that you are able to create new partitions for Generic.\n\n Two partitions are recommended. 1 for the system and 1 for SWAP.\n\n I think 3 GB are enough for the root-partition - Generic plus additional programs - and twice the amount of your RAM for the swap-partition.\n\n Just follow the menu, store your changes and quit cfdisk to go on!\n\n IMPORTANT: Read the instructions and the output of cfdisk carefully. Sometimes you have to reboot to update the partition table!" 20 70
+if [ $? = 1 ] ; then
+exit
+fi
+
+# Create partitions using fdisk or cfdisk.
+TMP=/tmp/tmp
+if [ ! -d $TMP ]; then
+  mkdir -p $TMP
+fi
+
+fdisk -l | grep -vE "loop|zram|ram" | sed -n 's/^Disk \(\/dev\/[^:]*\): \([^,]*\).*$/"\1" "\2" \\/p' >> $TMP/drivelist
+
+while [ 0 ]; do
+  echo dialog --ok-label Select \
+    --cancel-label Continue \
+    --title \"PARTITIONING\" \
+    --menu \"Select drive to partition:\" 11 40 4 \\\
+    > $TMP/tmpscript
+  cat $TMP/drivelist >> $TMP/tmpscript
+  echo "2> $TMP/tmpanswer" >> $TMP/tmpscript
+  . $TMP/tmpscript
+  [ $? != 0 ] && break
+  PARTITION=$(cat $TMP/tmpanswer)
+
+  if [ ! -f /etc/expert-mode ]; then
+    cfdisk $PARTITION
+  else
+    echo dialog --title \"PARTITIONING $PARTITION\" \
+      --menu \"Select which fdisk program you want to use. cfdisk is \
+      strongly recommended for newbies while advanced users may prefer fdisk.\" \
+      11 50 2 \
+      cfdisk \"Curses based partitioning program\" \
+      fdisk \"Traditional fdisk\" \
+      "2> $TMP/tmpanswer" > $TMP/tmpscript
+    . $TMP/tmpscript
+    [ $? != 0 ] && continue
+    FDISKPROGRAM=`cat $TMP/tmpanswer`
+    clear
+    if [ "$FDISKPROGRAM" = "cfdisk" ]; then
+      cfdisk $PARTITION
+    elif [ "$FDISKPROGRAM" = "fdisk" ]; then
+      fdisk $PARTITION
+    fi
+  fi
+done
+
+rm -f $TMP/drivelist $TMP/tmpscript $TMP/tmpanswer
+
+REDIR=/dev/tty4
+NDIR=/dev/null
+crunch() {
+ read STRING;
+ echo $STRING;
+}
+rm -f $TMP/SeTswap $TMP/SeTswapskip
+SWAPLIST="`fdisk -l | fgrep "Linux swap" | sort 2> $NDIR`" 
+if [ "$SWAPLIST" = "" ]; then
+ dialog --title "NO SWAP SPACE DETECTED" --yesno "You have not created \
+a swap partition with Linux fdisk.  \
+Do you want to continue installing without one? " 6 60
+ if [ "$?" = "1" ]; then
+  dialog --title "ABORTING INSTALLATION" --msgbox "Create a swap partition with Linux fdisk, and then try this again." 6 40
+  exit 1
+ fi
+else # there is at least one swap partition:
+ echo > $TMP/swapmsg 
+ if [ "$(echo "$SWAPLIST" | sed -n '2 p')" = "" ]; then
+  echo "Generic Installer has detected a swap partition:\n\n" >> $TMP/swapmsg
+  echo >> $TMP/swapmsg
+  echo "   Device Boot    Start       End    Blocks   Id  System\\n" >> $TMP/swapmsg
+  echo "`echo "$SWAPLIST" | sed -n '1 p'`\\n\n" >> $TMP/swapmsg
+  echo >> $TMP/swapmsg
+  echo "Do you wish to install this as your swap partition?" >> $TMP/swapmsg
+  dialog --title "SWAP SPACE DETECTED" --cr-wrap --yesno "`cat $TMP/swapmsg`" 12 72
+  REPLY=$?
+ else
+  echo "Generic Installer has detected the following swap partitions:" >> $TMP/swapmsg
+  echo >> $TMP/swapmsg
+  echo "   Device Boot    Start       End    Blocks   Id  System\\n" >> $TMP/swapmsg
+  echo "$SWAPLIST\\n\n" >> $TMP/swapmsg
+  echo >> $TMP/swapmsg
+  echo "Do you wish to install these as your swap partitions? " >> $TMP/swapmsg
+  dialog --title "SWAP SPACE DETECTED" --cr-wrap --yesno "`cat $TMP/swapmsg`" 13 72
+  REPLY=$?
+ fi
+ rm -f $TMP/swapmsg
+ if [ $REPLY = 0 ]; then # yes
+  if grep "SwapTotal: * 0 kB" /proc/meminfo 1> $NDIR 2> $NDIR ; then
+   USE_SWAP=0 # swap is not currently mounted
+  else # warn of possible problems:
+   # This 10231808 below is the size of a swapfile pre-supplied by install.zip that we'd like to ignore.
+   if grep 10231808 /proc/meminfo 1> $NDIR 2> $NDIR ; then
+    USE_SWAP=0
+   else
+    cat << EOF > $TMP/swapmsg
+IMPORTANT NOTE: If you have already made any of your swap 
+partitions active (using the swapon command), then you 
+should not allow Setup to use mkswap on your swap partitions,
+because it may corrupt memory pages that are currently 
+swapped out.  Instead, you will have to make sure that your 
+swap partitions have been prepared (with mkswap) before they
+will work.  You might want to do this to any inactive swap 
+partitions before you reboot.
+EOF
+    dialog --title "MKSWAP WARNING" --msgbox "`cat $TMP/swapmsg`" 12 67
+    rm -f $TMP/swapmsg
+    dialog --title "USE MKSWAP?" --yesno "Do you want Setup to use mkswap on your swap partitions?" \
+    5 65
+    USE_SWAP=$?
+   fi
+  fi
+  CURRENT_SWAP="1" 
+  while [ ! "`echo "$SWAPLIST" | sed -n "$CURRENT_SWAP p"`" = "" ]; do 
+   SWAP_PART=`fdisk -l | fgrep "Linux swap" | sed -n "$CURRENT_SWAP p" | crunch | cut -f 1 -d ' '`
+   if [ $USE_SWAP = 0 ]; then 
+    dialog --title "FORMATTING SWAP PARTITION" --infobox "Formatting \
+$SWAP_PART as a Linux swap partition (and checking for bad blocks)..." 4 55
+    mkswap -c $SWAP_PART 1> $REDIR 2> $REDIR
+   fi
+   echo "Activating swap partition $SWAP_PART:"
+   echo "swapon $SWAP_PART"
+   swapon $SWAP_PART 1> $REDIR 2> $REDIR
+   printf "%-11s %-11s %-11s %-27s %-2s %s\n" "$SWAP_PART" "swap" "swap" "defaults" "0" "0" >> $TMP/SeTswap
+   CURRENT_SWAP="`expr $CURRENT_SWAP + 1`"
+   sleep 1
+  done
+  echo "Your swapspace has been configured. This information will" > $TMP/swapmsg
+  echo "be added to your /etc/fstab:" >> $TMP/swapmsg
+  echo >> $TMP/swapmsg
+  cat $TMP/SeTswap >> $TMP/swapmsg 
+  dialog --title "SWAP SPACE CONFIGURED" --exit-label OK --textbox $TMP/swapmsg 10 72
+  cat $TMP/SeTswap > $TMP/SeTfstab
+  rm -f $TMP/swapmsg $TMP/SeTswap
+ fi
+fi  
+
+# format root partition
+fdisk -l | grep -vE "loop|zram|ram" | grep Linux | sed -e '/swap/d' | cut -b 1-9 > $TMP/pout 2>/dev/null
+
+dialog --clear --title "ROOT PARTITION DETECTED" --exit-label OK --msgbox "Generic installer has detected\n\n `cat /tmp/tmp/pout` \n\n as your linux partition(s).\n\n In the next box you can choose the linux filesystem for your root partition or choose the partition if you have more linux partitions!" 20 70
+if [ $? = 1 ] ; then
+exit
+fi
+
+# choose root partition
+dialog --clear --title "CHOOSE ROOT PARTITION" --inputbox "Please give me your prefered root partition in this way:\n\n /dev/hdaX --- X = number of the partition, e. g. 2 for /dev/hda2!" 10 70 2> $TMP/pout
+
+dialog --clear --title "FORMAT ROOT PARTITION" --radiolist "Now you can choose the filesystem for your root partition.\n" 10 70 0 \
+"1" "ext2" off \
+"2" "ext3" off \
+"3" "ext4" on \
+2> $TMP/part
+if [ $? = 1 ] ; then
+exit
+fi
+
+if [ `cat $TMP/part` = "1" ] ; then
+mkfs.ext2 `cat $TMP/pout`
+dialog --clear --title "FORMAT ROOT PARTITION" --msgbox "Now your partition has been formatted with ext2 filesystem." 10 70
+echo "UUID='$(blkid -s UUID -o value $(cat $TMP/pout))' / ext2 defaults 1 1" >> $TMP/SeTfstab2
+# mount the root partition to copy the system
+mkdir /mnt/`cat $TMP/pout | cut -b 6-9`
+mount /dev/`cat $TMP/pout | cut -b 6-9` /mnt/`cat $TMP/pout | cut -b 6-9`
+fi
+
+if [ `cat $TMP/part` = "2" ] ; then
+mkfs.ext3 `cat $TMP/pout`
+dialog --clear --title "FORMAT ROOT PARTITION" --msgbox "Now your partition has been formatted with ext3 filesystem." 10 70
+echo "UUID='$(blkid -s UUID -o value $(cat $TMP/pout))' / ext3 defaults 1 1" >> $TMP/SeTfstab2
+# mount the root partition to copy the system
+mkdir /mnt/`cat $TMP/pout | cut -b 6-9`
+mount /dev/`cat $TMP/pout | cut -b 6-9` /mnt/`cat $TMP/pout | cut -b 6-9`
+fi
+
+if [ `cat $TMP/part` = "3" ] ; then
+mkfs.ext4 `cat $TMP/pout`
+dialog --clear --title "FORMAT ROOT PARTITION" --msgbox "Now your partition has been formatted with ext4 filesystem." 10 70
+echo "UUID='$(blkid -s UUID -o value $(cat $TMP/pout))' / ext4 defaults 1 1" >> $TMP/SeTfstab2
+# mount the root partition to copy the system
+mkdir /mnt/`cat $TMP/pout | cut -b 6-9`
+mount /dev/`cat $TMP/pout | cut -b 6-9` /mnt/`cat $TMP/pout | cut -b 6-9`
+fi
+
+# copy the system
+dialog --clear --title "COPYING THE SYSTEM" --msgbox "Generic installer will now copy the running system to your harddisk.\n\n Press OK to start ..." 10 70
+if [ $? = 1 ] ; then
+exit
+fi 
+
+echo "rsync --force -ar /run/initramfs/memory/system/* /mnt/`cat $TMP/pout | cut -b 6-9`" > $TMP/rsync_cmd
+chmod +x $TMP/rsync_cmd
+
+#from: https://www.linuxquestions.org/questions/programming-9/dialog-command-buffering-problem-in-pipe-4175423593/#post4762038
+dialog --title "COPYING PROCESS" --msgbox "Generic installer is copying the system to your harddisk.\n\n Please be patient ... it may take up to 10 minutes depending on your system!" 10 70
+$TMP/rsync_cmd
+
+mkdir -p /mnt/`cat $TMP/pout | cut -b 6-9`/dev /mnt/`cat $TMP/pout | cut -b 6-9`/proc /mnt/`cat $TMP/pout | cut -b 6-9`/sys /mnt/`cat $TMP/pout | cut -b 6-9`/tmp
+
+dialog --clear --title "TRANSACTION FINISHED" --msgbox "Now Generic installer has finished the transaction." 10 70
+if [ $? = 1 ] ; then
+exit
+fi
+
+# create new fstab
+cat $TMP/SeTfstab > /mnt/`cat $TMP/pout | cut -b 6-9`/etc/fstab 2>/dev/null
+cat $TMP/SeTfstab2 >> /mnt/`cat $TMP/pout | cut -b 6-9`/etc/fstab 2>/dev/null
+
+mount --bind /dev /mnt/`cat $TMP/pout | cut -b 6-9`/dev
+mount --bind /proc /mnt/`cat $TMP/pout | cut -b 6-9`/proc
+mount --bind /sys /mnt/`cat $TMP/pout | cut -b 6-9`/sys
+
+grub-install --recheck --force --root-directory=/mnt/`cat $TMP/pout | cut -b 6-9` `cat $TMP/pout | cut -b 1-8`
+if ! chroot /mnt/`cat $TMP/pout | cut -b 6-9` grub-mkconfig -o /boot/grub/grub.cfg; then
+	# if here is error then panic!
+	dialog --title "ERROR" --infobox "Can't generate grub.cfg file!\n---\nI'm panic!\n" 10 70
+	umount -f /mnt/`cat $TMP/pout | cut -b 6-9`/dev /mnt/`cat $TMP/pout | cut -b 6-9`/proc /mnt/`cat $TMP/pout | cut -b 6-9`/sys
+	#umount -f /mnt/`cat $TMP/pout | cut -b 6-9`
+	exit 1
+fi
+
+umount -f /mnt/`cat $TMP/pout | cut -b 6-9`/dev /mnt/`cat $TMP/pout | cut -b 6-9`/proc /mnt/`cat $TMP/pout | cut -b 6-9`/sys
+
+rm -f /mnt/`cat $TMP/pout | cut -b 6-9`/etc/hostname
+while :; do
+	clear
+	echo "What is your hostname (computer name)?"
+	read hostname
+	if [ -z "$hostname" ]; then
+		clear
+		echo "This hostname can not be empty"
+		sleep 2
+	else
+		echo "$hostname" >/mnt/`cat $TMP/pout | cut -b 6-9`/etc/hostname
+		break
+	fi
+done
+
+echo "Installation completed!
+--------------------------------"
+sleep 4
+
+rm -rf $TMP
+while :; do
+	clear
+	echo -e "Would you like to reboot in to new system?\n[Y]es or [N]o?\n"
+	read choice
+	case $choice in
+	[Yy][Ee][Ss]|[Yy]) reboot ;;
+	[Nn][Oo]|[Nn]) exit ;;
+	*) echo "Bad option '${choice}'"; sleep 2 ;;
+	esac
+done
diff --git a/initrd/create b/initrd/create
new file mode 100644
index 0000000..2c425d2
--- /dev/null
+++ b/initrd/create
@@ -0,0 +1,127 @@
+#!/usr/bin/env bash
+
+set -x
+cd "$(dirname $(readlink -f ${0}))"||exit 1
+
+. ../.config
+
+INITRAMFS="/tmp/MlbInitRd"
+trap "rm -rf ${INITRAMFS}&&exit 1" 2 3 6 15
+
+# copy file to initramfs tree, including
+# all library dependencies (as shown by ldd)
+# $1 = file to copy (full path)
+copy_including_deps()
+{
+   # if source doesn't exist or target exists, do nothing
+   if [ ! -e "$1" -o -e "$INITRAMFS"/"$1" ]; then
+      return 1
+   fi
+
+   cp -R --parents "$1" "$INITRAMFS"
+   if [ -L "$1" ]; then
+      DIR="$(dirname "$1")"
+      LNK="$(readlink "$1")"
+      copy_including_deps "$(cd "$DIR"; realpath -s "$LNK")"
+   fi
+
+   ldd "$1" 2>/dev/null | sed -r "s/.*=>|[(].*//g" | sed -r "s/^\\s+|\\s+\$//" \
+     | while read LIB; do
+        copy_including_deps "$LIB"
+     done
+
+   for MOD in $(find "$1" -type f -name "*.ko"); do
+      for DEP in $(cat /$LMK/modules.dep | fgrep /$(basename $MOD):); do
+         copy_including_deps "/$LMK/$DEP"
+      done
+   done
+
+   shift
+   if [ "$1" != "" ]; then
+       copy_including_deps "$@"
+   fi
+}
+
+rm -Rf $INITRAMFS
+mkdir -p $INITRAMFS/{bin,dev,etc,lib,lib64,mnt,proc,root,run,sys,tmp,usr,var/log}
+mkdir -p $INITRAMFS/usr/{sbin,bin}
+ln -s bin $INITRAMFS/sbin
+
+# If bb is not found use all static prebuilt
+copy_including_deps /bin/busybox || { cp static/busybox $INITRAMFS/bin;static="true"; }
+for i in $($INITRAMFS/bin/busybox --list|egrep -v "tar|init"); do [ ! -e $INITRAMFS/bin/$i ]&&ln -sf busybox $INITRAMFS/bin/$i; done
+
+mknod $INITRAMFS/dev/console c 5 1
+mknod $INITRAMFS/dev/null c 1 3
+mknod $INITRAMFS/dev/ram0 b 1 0
+mknod $INITRAMFS/dev/tty1 c 4 1
+mknod $INITRAMFS/dev/tty2 c 4 2
+mknod $INITRAMFS/dev/tty3 c 4 3
+mknod $INITRAMFS/dev/tty4 c 4 4
+
+copy_including_deps /$LMK/kernel/fs
+for LINE in $(find /$LMK/kernel/ | grep crc32c); do
+   copy_including_deps $LINE
+done
+copy_including_deps /$LMK/kernel/drivers/staging/zsmalloc # needed by zram
+copy_including_deps /$LMK/kernel/drivers/block/zram
+copy_including_deps /$LMK/kernel/drivers/block/loop.*
+# usb drivers
+copy_including_deps /$LMK/kernel/drivers/usb/storage/usb-storage.*
+copy_including_deps /$LMK/kernel/drivers/usb/host
+copy_including_deps /$LMK/kernel/drivers/usb/common
+copy_including_deps /$LMK/kernel/drivers/usb/core
+copy_including_deps /$LMK/kernel/drivers/hid/usbhid
+copy_including_deps /$LMK/kernel/drivers/hid/hid.*
+copy_including_deps /$LMK/kernel/drivers/hid/uhid.*
+copy_including_deps /$LMK/kernel/drivers/hid/hid-generic.*
+# disk and cdrom drivers
+copy_including_deps /$LMK/kernel/drivers/cdrom
+copy_including_deps /$LMK/kernel/drivers/scsi/sr_mod.*
+copy_including_deps /$LMK/kernel/drivers/scsi/sd_mod.*
+copy_including_deps /$LMK/kernel/drivers/scsi/scsi_mod.*
+copy_including_deps /$LMK/kernel/drivers/scsi/sg.*
+copy_including_deps /$LMK/kernel/drivers/ata
+copy_including_deps /$LMK/kernel/drivers/nvme
+copy_including_deps /$LMK/kernel/drivers/mmc
+
+# copy all custom-built modules
+copy_including_deps /$LMK/updates
+copy_including_deps /$LMK/modules.*
+
+cp static/mount.dynfilefs $INITRAMFS/bin
+cp static/fsck $INITRAMFS/bin
+[[ ${static} ]]&&cp static/bash $INITRAMFS/bin||copy_including_deps /bin/bash
+[[ ${static} ]]&&cp static/tar $INITRAMFS/bin||copy_including_deps /bin/tar||copy_including_deps /usr/bin/tar
+[[ ${static} ]]&&cp static/e2fsck $INITRAMFS/bin||copy_including_deps /sbin/e2fsck
+[[ ${static} ]]&&cp static/fsck.fat $INITRAMFS/bin||copy_including_deps /sbin/fsck.fat
+[[ ${static} ]]&&cp static/f2fs $INITRAMFS/bin||copy_including_deps /sbin/fsck.f2fs
+[[ ${static} ]]&&cp static/mdadm $INITRAMFS/bin||copy_including_deps /sbin/mdadm
+[[ ${static} ]]&&cp static/mount.ntfs-3g $INITRAMFS/bin||copy_including_deps /sbin/mount.ntfs-3g
+#[[ ${static} ]]&&cp static/blkid $INITRAMFS/bin||copy_including_deps /sbin/blkid
+#copy_including_deps /usr/bin/eject || cp static/eject $INITRAMFS/bin
+
+# trim modules.order file. Perhaps we could remove it entirely
+MODULEORDER="$(cd "$INITRAMFS/$LMK/"; find -name "*.ko" | sed -r "s:^./::g" | tr "\n" "|" | sed -r "s:[.]:.:g")"
+cat $INITRAMFS/$LMK/modules.order | sed -r "s/.ko.gz\$/.ko/" | grep -E "$MODULEORDER"/foo/bar > $INITRAMFS/$LMK/_
+mv $INITRAMFS/$LMK/_ $INITRAMFS/$LMK/modules.order
+
+depmod -b $INITRAMFS $(ls $INITRAMFS/lib/modules | sort)
+
+echo "root::0:0::/root:/bin/sh" >$INITRAMFS/etc/passwd
+touch $INITRAMFS/etc/{m,fs}tab
+
+cp shutdown $INITRAMFS
+cp functions $INITRAMFS/lib
+cp init $INITRAMFS
+ln -s ../init $INITRAMFS/bin/init
+cp ../.config $INITRAMFS/lib
+chmod a+x -R $INITRAMFS
+
+cd $INITRAMFS
+find | cpio -R root:root -o -H newc 2>/dev/null | gzip -cf9 >$INITRAMFS.img
+echo $INITRAMFS.img
+
+cd ..
+rm -rf $INITRAMFS
+[[ ${static} ]]&&exit 2||exit 0
diff --git a/initrd/functions b/initrd/functions
new file mode 100644
index 0000000..ace69b2
--- /dev/null
+++ b/initrd/functions
@@ -0,0 +1,200 @@
+# shellcheck disable=SC2148
+export PATH=".:/:/usr/sbin:/usr/bin:/sbin:/bin"
+export LD_LIBRARY_PATH="/lib:/lib/i386-linux-gnu:/lib64:/lib64/x86_64-linux-gnu:/lib/x86_64-linux-gnu:/usr/lib/i386-linux-gnu:/usr/lib64/x86_64-linux-gnu:/usr/lib/x86_64-linux-gnu"
+export MEMORY="/memory"
+export MODULES="${MEMORY}/modules"
+export CHANGES_MNT="${MEMORY}/changes"
+export CHANGES="${CHANGES_MNT}/changes"
+export WORK="${CHANGES_MNT}/work"
+export UNION="${MEMORY}/union"
+export DATAMNT="${MEMORY}/data"
+export SYSTEM="${MEMORY}/system"
+export SHELL_IS_ENABLED="_SHELL_ENABLED_"
+
+progress()
+{
+	sh -c "${1}" >/dev/null 2>&1&
+	local pid="${!}"
+	while :; do
+		if [ -d /proc/${pid} ]; then
+			echo -n "."
+			sleep 0.25
+		else
+			echo -en " DONE!\n"
+			break
+		fi
+	done
+}
+grepCmdLine()
+{
+	for i in `</proc/cmdline`; do egrep "^${1}|^${1}=.*" <<<${i}|cut -f2 -d=; done
+	return ${?}
+}
+d()
+{
+	grepCmdLine debug >/dev/null 2>&1
+	return ${?}
+}
+isShellEnabled()
+{
+	d&&echo -n "Is 'shell' bootloader variable set? "
+	if grepCmdLine shell; then
+		d&&echo -en "Yes\n"
+		sed -i "s/_SHELL_ENABLED_/true/g" /lib/functions >/dev/null 2>&1
+		echo "[!] Reloading /lib/functions"
+		if . /lib/functions; then
+			echo -en "Done\n"
+		else
+			echo -en "Failed\n"
+			emergencyShell
+		fi
+	else
+		d&&echo -en "No\n"
+	fi
+}
+isZramEnabled()
+{
+	d&&echo -n "Is zram supported? "
+	if [ -e /sys/block/zram0/disksize ]; then
+		d&&echo -en "Yes\n"
+		echo 536870912 >/sys/block/zram0/disksize
+		mkswap /dev/zram0 >/dev/null 2>&1
+		swapon /dev/zram0 >/dev/null 2>&1
+		echo 100 >/proc/sys/vm/swappiness
+	else
+		d&&echo -en "No\n"
+	fi
+}
+findData()
+{
+	d&&echo -n "Searching ${DISTRO} in /dev -> "
+	#local from="$(grepCmdLine from)"
+	for i in ${root:-/dev/[hmnsv][dmrv][0-9a-z]*}; do
+		d&&echo -n "${i#/dev/} "
+		mount -o ro ${i} ${DATAMNT} >/dev/null 2>&1
+		sleep 0.5
+		#[[ ${from} ]]&&mount ${DATAMNT}/${from} ${DATAMNT} >/dev/null 2>&1
+		if [ -e ${DATAMNT}/${DISTRO}/system.sfs ]; then
+			d&&echo -e "\nFound ${DISTRO} in ${i}"
+			grepCmdLine fsck&&fsck ${i} >/dev/null 2>&1||true
+			d&&echo -n "Is 'toram' bootloader variable set and enought RAM space? "
+			if grepCmdLine toram; local a=${?}&&[[ "$(grep MemFree /proc/meminfo|awk '{print $2}')" -gt $(("$(du ${DATAMNT}|tail -n1|awk '{print $1}')"-"$(du ${DATAMNT}/changes|tail -n1|awk '{print $1}')")) ]]; then
+				d&&echo -en "Yes\n"
+				mkdir -p /tmp/data
+				d&&echo -n "Copying to RAM "
+				d&&progress "tar -c -C ${DATAMNT} --exclude ./changes -f - . | tar -xf - -C /tmp/data"
+				umount -f ${DATAMNT} >/dev/null 2>&1
+				#[[ ${from} ]]&&umount -f ${DATAMNT} >/dev/null 2>&1
+				mv -f /tmp/data/* ${DATAMNT} >/dev/null 2>&1
+				rm -rf /tmp/data >/dev/null 2>&1
+			else
+				d&&if [[ "${a}" != "0" ]]; then echo -ne "Not requested by bootloader or low RAM space!\n"; else echo -ne "Internal error? Trying tmpfs, so data after power-off will be erased permanently!\n"; fi
+				mount -o remount,rw ${DATAMNT} >/dev/null 2>&1||true
+			fi
+			mount ${DATAMNT}/${DISTRO}/system.sfs ${SYSTEM} >/dev/null 2>&1
+			sleep 0.5
+			break
+		else
+			umount -f ${DATAMNT} >/dev/null 2>&1
+		fi
+	done
+	if ! grep -q ${SYSTEM} /proc/mounts; then
+		d&&echo "Can not find compatible distro!"
+		emergencyShell
+	fi
+}
+findModules()
+{
+	d&&echo -n "Trying to mount modules from ${DATAMNT}/${DISTRO}/modules -> "
+	if ls ${DATAMNT}/${DISTRO}/modules/*.sfs >/dev/null 2>&1; then
+		for i in $(find ${DATAMNT}/${DISTRO}/modules -maxdepth 1 -type f -name "*.sfs"|sort); do
+			mkdir -p ${MODULES}/$(basename ${i} .sfs)
+			d&&echo -n "$(basename ${i}) "
+			mount ${i} ${MODULES}/$(basename ${i} .sfs) >/dev/null 2>&1
+		done
+		d&&echo -en "Done\n"
+	else
+		d&&echo -en "Failed, modules not found! Continuing...\n"
+	fi
+}
+mountOverlay()
+{
+	if grep -q ${MODULES} /proc/mounts; then
+		mount -t overlay -o lowerdir=${SYSTEM}:$(find ${MODULES} -mindepth 1 -maxdepth 1 | tac | tr "\n" ":" | sed -r "s/:$//"),upperdir=${CHANGES},workdir=${WORK} overlay ${UNION}
+	else
+		mount -t overlay -o lowerdir=${SYSTEM},upperdir=${CHANGES},workdir=${WORK} overlay ${UNION}
+	fi
+}
+persistentChanges()
+{
+	if ! grepCmdLine perch&&grepCmdLine toram; then
+		return
+	fi
+	local CHANGES T1 T2 EXISTS
+	CHANGES=$DATAMNT/changes
+	T1="$CHANGES/.empty"
+	T2="$T1"2
+	mkdir -p "$2"
+	touch "$T1" 2>/dev/null && rm -f "$T1" 2>/dev/null
+	if [ $? -ne 0 ]; then
+		return
+	fi
+	d&&echo "Testing persistent changes for posix compatibility"
+	touch "$T1" && ln -sf "$T1" "$T2" 2>/dev/null && \
+	chmod +x "$T1" 2>/dev/null && test -x "$T1" && \
+	chmod -x "$T1" 2>/dev/null && test ! -x "$T1" && \
+	rm "$T1" "$T2" 2>/dev/null
+	if [ $? -eq 0 ]; then
+		d&&echo "Activating native persistent changes"
+		mount --bind "$CHANGES" "$2" >/dev/null 2>&1
+		return
+	fi
+	if [ -e "$CHANGES/changes.dat.0" ]; then
+		d&&echo "Restoring persistent changes"
+		EXISTS="true"
+	else
+		d&&echo "Creating new persistent changes"
+		EXISTS=""
+	fi
+	mount.dynfilefs -f "$CHANGES/changes.dat" -s 16000 -m "$2" -p 4000 >/dev/null 2>&1
+	[ ! "$EXISTS" ] && mke2fs -F -L "DATA" "$2/virtual.dat" >/dev/null 2>&1
+	grepCmdLine fsck && fsck ${2}/virtual.dat >/dev/null 2>&1
+	mount "$2/virtual.dat" "$2" >/dev/null 2>&1
+	rm "$T1" "$T2" >/dev/null 2>&1
+	rmdir "$2/lost+found" >/dev/null 2>&1
+}
+debugShell()
+{
+	if [ "$SHELL_IS_ENABLED" = "true" ]; then
+		echo -e "Debug shell!\nControl+D or 'exit' to contiunue boot.\n"
+		setsid cttyhack sh
+	fi
+}
+changeRoot()
+{
+	cd "$1"
+	umount -f /sys /proc
+	cat <<eot >etc/fstab
+proc /proc proc defaults 0 0
+sysfs /sys sysfs defaults 0 0
+devpts /dev/pts devpts gid=5,mode=620 0 0
+tmpfs /dev/shm tmpfs defaults 0 0
+overlay / overlay defaults 0 0
+eot
+	mkdir -p run
+	mount -t tmpfs tmpfs run
+	mkdir -p run/initramfs
+	mount -o remount,ro overlay .
+	pivot_root . run/initramfs
+	exec chroot . init
+}
+emergencyShell()
+{
+	exec >/dev/console >&1 2>&1 <&1
+	echo "Error: Please inspect '/tmp/mlb.log' file"
+	export PS1="RESCUE # "
+	while :; do
+		echo "Rescue shell!"
+		setsid cttyhack sh
+	done
+}
diff --git a/initrd/init b/initrd/init
new file mode 100644
index 0000000..281f67c
--- /dev/null
+++ b/initrd/init
@@ -0,0 +1,47 @@
+#!/bin/bash
+
+. /lib/.config
+. /lib/functions
+
+if [ ! -e /lib/.escaped ]; then
+	SWITCH=/m
+	mkdir -p ${SWITCH}
+	mount -t tmpfs -o size="100%" tmpfs ${SWITCH}
+	cp -a /??* ${SWITCH} 2>/dev/null
+	cd ${SWITCH}
+	mount -t proc proc /proc
+	echo "0" >/proc/sys/kernel/printk
+	>lib/.escaped
+	d&&echo "[!] Reloading ${0}"
+	mount --move /proc proc
+	exec switch_root . ${0}
+fi
+mount -t devtmpfs devtmpfs /dev >/dev/null 2>&1
+ln -sf /proc/self/fd /dev/fd
+exec > >(tee -i /tmp/mlb.log) 2>&1
+d&&echo "'debug' bootloader variable is set!"&&set -x
+mount -t sysfs sysfs /sys >/dev/null 2>&1
+mkdir -p ${UNION} ${DATAMNT} ${SYSTEM}
+isShellEnabled
+ln -sf /proc/mounts /etc/mtab
+find /lib/modules/`uname -r` -name "*.ko" -type f | sed -r "s:^.*/|[.]ko\$::g" | xargs -n 1 modprobe >/dev/null 2>&1
+sleep 3
+mdev -s
+debugShell
+isZramEnabled
+mdadm --assemble --scan >/dev/null 2>&1
+sleep 0.5
+debugShell
+findData
+debugShell
+findModules
+debugShell
+persistentChanges ${SYSTEM} ${CHANGES_MNT}
+mkdir -p ${CHANGES} ${WORK}
+debugShell
+mountOverlay >/dev/null 2>&1
+debugShell
+d&&echo "Starting ${DISTRO}"
+d&&sleep 2
+changeRoot "$UNION" || clear; echo "!!ERROR occured, you shouldn't be here.!!"; sleep 3
+emergencyShell
diff --git a/initrd/shutdown b/initrd/shutdown
new file mode 100644
index 0000000..0381187
--- /dev/null
+++ b/initrd/shutdown
@@ -0,0 +1,48 @@
+#!/bin/bash
+# Original Author: Tomas M <http://www.linux-live.org/>
+# Author: Daniel K. <http://danielisko.net, http://git.danielisko.net>
+
+action="${1}"
+. /lib/.config
+. /lib/functions
+detach_loops()
+{
+	losetup -a | cut -d : -f 1 | xargs -r -n 1 losetup -d
+}
+umount_all()
+{
+	for i in $(tac /proc/mounts | cut -d" " -f2 | grep "^${1}"); do
+		umount -fld ${i}
+		detach_loops
+	done
+}
+
+exec </dev/console >>/dev/console 2>>/dev/console
+[ "${DEBUG_IS_ENABLED}" = "true" ]&&set -x
+debugShell
+echo "Minimal Linux Booter - Shutdown Magic!"
+echo "Entering to clean-up things before final step."
+(
+	mdev -s
+	sleep 1.5
+	detach_loops
+	umount_all /oldroot
+	NR=100
+	for i in $(tac /proc/mounts | cut -d" " -f2 | grep ^/oldroot/.); do
+	   NR=$((${NR}+1))
+	   mkdir -p /move/${NR}
+	   mount --move ${i} /move/${NR}
+	   umount -fld /oldroot
+	done
+	for i in 1 2 3 4; do
+		for d in $(ls -1 /move 2>/dev/null | sort); do
+			umount_all /move/${d}
+		done
+	done
+	umount_all /memory
+) >/dev/null 2>&1
+case ${action} in
+	reboot|poweroff|halt|shutdown) ${action} -f;;
+	*) reboot -f;;
+esac
+emergencyShell #Last luck emergency shell after reboot doesn't work; usefull for debugging
diff --git a/initrd/static/bash b/initrd/static/bash
new file mode 100644
index 0000000..aaf3fe9
Binary files /dev/null and b/initrd/static/bash differ
diff --git a/initrd/static/blkid b/initrd/static/blkid
new file mode 100644
index 0000000..feaf742
Binary files /dev/null and b/initrd/static/blkid differ
diff --git a/initrd/static/busybox b/initrd/static/busybox
new file mode 100644
index 0000000..8d52af3
Binary files /dev/null and b/initrd/static/busybox differ
diff --git a/initrd/static/e2fsck b/initrd/static/e2fsck
new file mode 100644
index 0000000..42ff4df
Binary files /dev/null and b/initrd/static/e2fsck differ
diff --git a/initrd/static/fsck b/initrd/static/fsck
new file mode 100644
index 0000000..4ff5cab
--- /dev/null
+++ b/initrd/static/fsck
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+dev=$1
+[ "$dev" = "" ] && exit 1
+
+fs=$(blkid "$dev" | grep -o ' TYPE=".*' | cut -f 2 -d '"')
+
+case $fs in
+	ext2|ext3|ext4) e2fsck -y $dev ;;
+	vfat|msdos) fsck.fat -y $dev ;;
+	exfat) exfatfsck $dev ;;
+	*) echo "(${dev}) Not supported: $fs" ; exit 1 ;;
+esac
diff --git a/initrd/static/fsck.f2fs b/initrd/static/fsck.f2fs
new file mode 100644
index 0000000..4c7eacc
Binary files /dev/null and b/initrd/static/fsck.f2fs differ
diff --git a/initrd/static/fsck.fat b/initrd/static/fsck.fat
new file mode 100644
index 0000000..c369ca6
Binary files /dev/null and b/initrd/static/fsck.fat differ
diff --git a/initrd/static/mdadm b/initrd/static/mdadm
new file mode 100644
index 0000000..0c0a38c
Binary files /dev/null and b/initrd/static/mdadm differ
diff --git a/initrd/static/mount.dynfilefs b/initrd/static/mount.dynfilefs
new file mode 100644
index 0000000..8ff36c0
Binary files /dev/null and b/initrd/static/mount.dynfilefs differ
diff --git a/initrd/static/mount.ntfs-3g b/initrd/static/mount.ntfs-3g
new file mode 100644
index 0000000..d51554c
Binary files /dev/null and b/initrd/static/mount.ntfs-3g differ
diff --git a/initrd/static/tar b/initrd/static/tar
new file mode 100644
index 0000000..fb8a89f
Binary files /dev/null and b/initrd/static/tar differ